CONTACT
Can't find what you're looking for?
No Problem, just leave us a message with your inquiry.
No Problem, just leave us a message with your inquiry.
FAQ
Operation & Application Options
For which vehicles is the Modul E-Drive suitable?
The Modul E-Drive is generally suitable for all semi-trailers. However, please note that the vehicles must have an electrical power supply of 24 V and must be fused with at least 15 A A (minimum section of 2.5mm” required).
Is it possible to lift loads with the electrical drive?
If the Modul E-Drive is based on the Modul B series, why can the Modul B not be retrofitted?
What happens if the motor stops running?
I would like to mount the Modul E-Drive on a drawbar trailer. Can I only purchase and use the engine landing gear from JOST?
Installation
How is power supplied to the Modul E-Drive?
The power supply must be provided by a battery (24 V) and be protected with at least 15 A (minimum section of 2.5mm” required). A connection can be made between the truck and trailer using spiral cables if the battery cannot be connected to the trailer. JOST recommends connection via the 15-pole connector (pin 4 + pin 9) in accordance with ISO 12098.
Which installation effort is to be expected?
Can I install the control elements on the vehicle individually?
Support
Who can I contact in case of any questions?
Should you have any questions or suggestions, please contact jost-info@jost-world.com